Cy Iinder Packing And Plate And Blanket Size - Ryobi 3302H Operation Manual

1-4 Cylinder Packing and Plate and Blanket Size
1) Plate packing and plate size
(Leading edge)
1
220 mm (8.66")
1
I
t
I
I
~-----i------~.T22mm(0.87")
11 mm (0.43") Printing start line
Max. printing area
485mm
330 x 438 mm
(19.09") (12.99
X
17.24")
1~
1-335 mm (13.19")-l
Chapter 1 Press Outline
Plate packing (standard)
0.15 mm (0.006")
(Reference) The 0.15 mm (0.006") plate thickness is the standard thickness. However, the pressure between the
plate cylinder and blanket cylinder can be adjusted by the plate pressure adjustment scale. So, a plate
with a thickness from 0.1 mm (0.004") to 0.3 mm (0.012") can be used.
<Metal plate, polyester plate, or paper master>
(Leading edge)
1
220 mm (8.66")
1
I
t
I
I
r-'1----- l-----
-u--
_T22 mm (0.87")
11 mm (0.43") Printing start line
Max. printing area
485± 1 mm
(19.09
±
0.04")
330x 438 mm
(12.99
X
17.24")
1!--------!
1-335 mm (13.19")-J
Plate packing (standard)
0.15 mm (0.006")
(Reference) A metal plate with a 0.15 mm (0.006") plate thickness and a polyester plate with a 0.2 mm (0.008")
plate thickness can be used. Please adjust the pressure between the plate cylinder and blanket cylin-
der by the plate pressure adjustment scale.
Introduction Edition - 7