Ryobi 3302H Operation Manual page 139

<Vertical image adjustment>
Leading edge
=t
Tail edge
Chapter 1 Operation Procedures
Stop the press and push in the vertical image micro
adjustment dial while pushing the clutch lever down.
When releasing your hand from the clutch lever after
pushing it down, the adjustment dial is engaged and
the vertical image adjustment can be done.
«NOTICE»
Do not use the dial while the press is running. If
the dial is pushed in forcefully while the press is
running, the press may be dameged.
Tum the vertical image micro adjustment dial and
do the vertical image adjustment.
The maximum movement volume is
±
20 mm
(0.787"). When turning the adjustment dial in the
"+"
direction, the image will move toward the
leading edge.
!iBress:~jth~u,'Semtaut6tnati~t·ttfatEtJf:Jfia;:tii~1
(Reference) Turning the adjustment dial by one
scale moves the image 0.25 mm
(0.0098").
l:irJS,~~witfitilmt~fQ.WAtitll~ilatftlllilA,tJ
(Reference) Turning the adjustment dial by one
scale moves the image 0.05mm
(0.0002").
Operation Edition - 53