Ryobi 3302H Operation Manual page 58

Chapter 2 Names and Functions
I.PresswithSerniaut9rhaticPiateChanger.l
@A Ge ·~·
c
..,,..
~D
@) []OD
A. ~ Emergency stop button
When pushing this button, the press will stop and
the button will lock. In this condition, the press
cannot be run and also crawl operation cannot be
done. When turning the button in the direction of
the arrow, the lock will be released and the press can
be run and crawled.
B.
[?§]
Reverse crawl button
WARNING
Never touch the rotating parts when doing the
crawl operation. Failure to follow this
instruction may result in a serious injury.
When pushing this button with the crawl ON/OFF
button on this panel locked, the starting buzzer
sounds. After the buzzer sounds, push the button
again to crawl the press in the reverse direction.
When pushing this button within 10 seconds after
the former crawl operation, the starting buzzer will
not sound and the press will crawl in the reverse
direction.
There are 2 different kinds of crawl operation speed
(1 m/min. and 5 m/min.).
( • Safety Operation Edition - 19)
«NOTICE»
When the paper master is mounted without the
tail edge clamped, do not crawl the press in the
reverse direction because the paper master will
roll up in the rollers.
Introduction Edition - 20
CG €JF
c-e
D
D
D
C.
~
Crawl ON/OFF button
When pushing this button, the press will stop and
the button will lock. In this condition, the press
cannot be run, but the crawl operation can be done.
When turning the button in the direction of the arrow,
the lock will be released and the press can be run.
D.
§]
Forward crawl button
WARNING
Never touch the rotating parts when doing the
crawl operation. Failure to follow this
instruction may result in a serious injury.
When pushing this button with the crawl ON/OFF
button on this panel locked, the starting buzzer
sounds. After the buzzer sounds, push the button
again to crawl the press in the forward direction.
When pushing this button within 10 seconds after
the former crawl operation, the starting buzzer will
not sound and the press will crawl in the forward
direction.
There are 2 different kinds of crawl operation speed
(1m/min. and 5 m/min.).
( • Safety Operation Edition - 19)