English GENERAL POWER TOOL SAFETY WARNINGS 3. PERSONAL SAFETY a. Stay alert, watch what you are doing and use common sense when operating a power WARNING tool. Do not use a power tool while you are Read all safety warnings and all instructions. Failure tired or under the influence of drugs, alcohol to follow the warnings and instructions may result in electric or medication.
English dangerous in the hands of untrained users. cord. e. Maintain power tools. Check for misalignment Complies with AS/NZS 60745. or binding of moving parts, breakage of parts Recommended for the use of a residual current device and any other condition that may affect the with a rated residual current of 30 mA or less.
Page 7
English push in and hold the lock-on button located on the side of GENERAL CUTTING the handle, then release trigger switch. Release lock-on See Figure 3. button and your saw will continue running. Rest the front of the saw base on the workpiece and align To release the lock, depress the trigger switch and release.
Page 8
English Re-tighten the base retaining screw with the wrench to IMPORTANT secure the base. When cutting metal, keep exposed portion of saw bar TO MAKE A PLUNGE CUT clean and free of metal chips by wiping frequently with an oily cloth. Use extreme caution in disposing of oily See Figure 6.
English WARNING CAUTION When servicing, use only identical replacement parts. Keep extension cords away from the cutting area and Use of any other part may create a hazard or cause position the cord so that it will not get caught on lumber, product damage.
Page 10
English Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.