A
WARNING
Never "crawl" and "work" at the same
time!
When doing the work with the "crawl operation", for
example cleaning the plate cylinder, blanket cylinder,
impression cylinder, and water oscillating roller, never
crawl and work at the same time.
Pushing the button and work should be done
separately.
Failure to follow this instruction may result in a serious
injury.
Be sure of what the other people are
doing!
Pay attention to what work the others are doing when
working with 2 or more people.
When you start to run or crawl the press, first give
them a signal. Only after receiving their signal or
response, should you start the work.
Failure to follow this instruction may result in a serious
injury.
Chapter 4 Precautions When Operating
Mount the cylinder gap safety covers
properly!
Mount the cylinder gap safety covers on the blanket
cylinder and impression cylinder properly before
running the press.
Failure to follow this instruction may result in a serious
injury.
Never touch the rotating parts!
Never touch the rotating parts.
When foreign particles are on the plate cylinder and
rollers, stop the press before removing them.
Failure to follow this instruction may result in a serious
injury.
Safety Operation Edition - 11