Ryobi 3302H Operation Manual page 222

Chapter 1 RYOBI PCS-F
3) Formatting the floppy disk
When using a new floppy disk, it needs to be formatted first.
The setting procedures of formatting differ depending on the floppy disk type (2HD and 2DD), so please be careful.
(2HD : 1.44MB, 2DD : 720KB)
4) Handling the floppy disk
• When opening the write protect notch of the floppy disk, the data cannot be erased and new data cannot be saved.
protect
notch
• Please copy all important data onto another floppy disk as a backup.
• Be careful not to allow ink to adhere on the floppy disk. If a floppy disk with ink adhered is used, floppy disk drive
trouble will result.
• Never touch the magnetic surface of the floppy disk with your hand.
The access cover of the floppy disk can be opened by hand easily. However if fingerprints, finger oil, or dust
adhere on the magnetic surface of the disk, saving and reading errors will result.
Access cover
• Be careful not to allow water or dust to come in contact with the floppy disk surface. After the floppy disk is used,
it should be placed back in the disk case.
• Never bring the floppy disk near or place it on any strong magnetism.
• Never allow a solvent like a thinner and alcohol to come in contact with the floppy disk.
• Never put anything on the floppy disk, pinch it with paper clips, or bend it.
• Never leave the floppy disk in direct sunlight. High temperatures will also adversely affect it, so please be careful.
Optional Accessories Edition - 4