Setting The Registration Section - Ryobi 3302H Operation Manual

9) Set the guide rollers position.
Chapter 1 Operation Procedures
Adjust the pull-out roller pressure.
While rotating the pull-out roller with your finger
lightly, adjust the pressure by turning the adjustment
knob so it is the same on both the operation and non
operation sides.
When turning the adjustment knob counter-
clockwise, the pressure is increased.
A
CAUTION
Stop the press before setting. Failure to follow this instruction may result in an
injury.
Set the guide rollers at the position where they do
not contact the retainers.
8. Setting the Registration Section
1) Set the push side guide.
A
CAUTION
Stop the press before setting. Failure to follow this instruction may result in an
injury.
Set the indicator on the push side guide adjustment
dial in the center (2 on the scale).
Operation Edition - 33