Chapter 1 Maintenance After The Printing; Cleaning The Ink Section - Ryobi 3302H Operation Manual

Maintenance after the Printing
«NOTICE»
Be sure to do the maintenance after the printing to keep the press in top operation condition.
1. Cleaning the Ink Section
A
WARNING
Stop the press before cleaning. Failure to follow this instruction
may result in a serious injury.
Remove the ink in the ink fountain.
Loosen the ink fountain fixing knobs and pull the ink fountain downwards.
Clean the side edges of the ink fountain roller, both sides of the ink
fountain, and fountain blade edge well.
«NOTICE»
1. Do not use any powerful corrosive acid or chlorine type cleaning
solution on the metal. The metal may corrode when the acid or chlo-
rine reacts with the water.
Example of powerful corrosive chemicals:
Plate cleaner {powerful acid)
Blanket cleaner (chlorine type}
2. If the press will not be operated for 3 days or more, apply the rust
preventive oil on the ink fountain roller after cleaning it.
Also if the printing room environment is one with a high temperature
and damp, the metal will easily corrode and rust. Therefore in this
environment when not using the press the following day, apply the
rust preventive oil on the ink fountain roller after cleaning it.
Mount the ink roller cleanup attachment on the bracket.
Maintenance Edition - 1