Ryobi 3302H Operation Manual page 212

Chapter 5 Troubles and Countermeasures
5) The paper is not fed smoothly.
Cause
I
A lack of vacuum or blower volume
I
Poor rotation of the skid rollers
I
Electrostatic is generated on the paper.
6) Poor registration
(Poor front registration)
Cause
I
Poor positioning of skid rollers
I
Poor paper feed volume
The distance between the skid rollers and paper tail
edge is not always the same due to poor paper
cutting.
Maintenance Edition - 48
Countermeasure
1. Control the vacuum volume and blower volume.
( • Operation Edition - 30)
2. Clean the air pump filter.
( • Maintenance Edition - 28)
Clean and lubricate the skid rollers.
( • Maintenance Edition - 30)
1. Clean the static eliminator electrode.
( • Maintenance Edition- 34)
2. Adjust the humidity in the working area.
(The normal humidity should be around 60%.)
Countermeasure
Reposition the skid rollers.
( • Operation Edition - 38)
Adjust the rotation volume of the upper feed roller.
( 1-114 to 1-1/2 rotations)
Cut the paper again so that difference of the paper
size is within 1 rom (0.039").