Ryobi 3302H Operation Manual page 137

Chapter 1 Operation Procedures
I
Press with• semiautdiTlatic,.F?Iate chaitgerl
<Diagonal image adjustment by moving the plate (Adjustment example)>
( • Operation Edition - 64)
l~
+
+.II
Leading edge
D
Q;P-
lj::J
r9f
D
GP
OPS
Here we will explain about moving the operation
side image toward the leading edge.
When pushing the automatic plate tension/release
button, the starting buzzer sounds. After the buzzer
sounds, push the button again. The press will release
the plate tension and stop automatically at the
diagonal image adjustment knob turning position.
After that, the buzzer sounds.
(Reference) While the press runs, the automatic
plate tension/release button can be
used.
(Note) When the paper master is mounted without
the tail edge clamped, it cannot be used.
Open the safety cover and tum the diagonal image
adjustment knob clockwise.
Turning the knob by one scale moves the image
about 0.05 mm (0.002"). (The plate tail edge moves
in the lateral direction.)
Push the automatic plate tension/release button. The
press will start to clawl and tension the plate
automatically. After that, the press stops. The
warning buzzer continuously sounds after the
starting buzzer sounds until tensioning the plate.
Operation Edition - 51