Ryobi 3302H Operation Manual page 195

Chapter 3 Periodic Maintenance
A
WARNING
Mount the cover removed in place after cleaning. Failure to follow this instruction may result in a
serious injury.
«NOTICE»
Do not use organic solvents such as gasoline when cleaning the element.
The standard pressure of the regulator is 0.6 MPa. When the pressure is lower than 0.6 MPa, remove the element
of the regulator and clean it with the neutral detergent.
Cleaning procedures
1. Remove the cover
(1).
4. Clean the element by using the
neutral detergent.
(1)
2. Tum the cover while pushing the
button (1), align the cover arrow
with the body arrow, and remove
the cover.
5. Mount the removed parts in the
reverse order.
3. Turn the element holder (1)
counterclockwise and remove
the element holder ( 1) and
element (2).
Maintenance Edition - 37