Operation Procedures - Ryobi 3302H Operation Manual

2-3 Operation Procedures
1)
Set the blanket cleaning device.
Chapter 2 Blanket Cleaning Device
Put the cleaning solution into the bottle and mount it on the bracket.
Never use a blanket cleaning solution which has a flash point lower than
ss·c
(131 ·F).
(Note) On the inside of the bottle cap, there is a rubber packing (1). If the
bottle is mounted without the packing, the cleaning solution in
the cleaning tray may overflow. So please be careful.
When shifting the blanket cleaning solution changeover lever to
the
EIJ
position in the unit to be used, the cleaning solution is supplied in
the tray. With the lever at this position, the proper volume of the cleaning
solution is automatically supplied into the tray.
Set the drain bottle (a big bottle, can, or other suitable container).
Optional Accessories Edition - 27