Ryobi 3302H Operation Manual page 140

Chapter 1 Operation Procedures
Operation Edition - 54
<Lateral image adjustment>
Leading edge
Push the clutch lever down again to release the
vertical image micro adjustment dial lock.
(Note) When the adjustment dial is locked, a safety
device actuates and the press cannot be run.
Turn the plate cylinder lateral image micro
adjustment dial and do the lateral image adjustment.
Turning the plate cylinder lateral image micro
adjustment dial clockwise, the image will move
toward the operation side.
(Reference)
r .....
Turning the adjustment dial
by one scale moves the
image 0.1 mm (0.004").
(Note) 1. Do not adjust the lateral image by using the plate cylinder lateral image micro
adjustment dial during the printing.
2. The maximum movement volume by using the plate cylinder lateral image micro
adjustment dial is± 2 mm (0.08"). If the image position cannot be adjusted within
this range, change the plate exposing position.