Ryobi 3302H Operation Manual page 96

Chapter 1 Operation Procedures
Operation Edition - 1 0
3) Set the water rider oscillating roller.
A
CAUTION
Stop the press before setting. Failure to follow this instruction may result in an
injury.
{1)
Tum the water rider oscillating roller release knob
(1) and set at the 12 o'clock position.
When there is a unit which is not used, be sure to
tum the knob
(1)
and set at the 3 o'clock position
and pull the water rider oscillating roller by hand
toward you so that the water rider oscillating roller
is released from the water form roller.