(Metal Plate, Polyester Plate, Or Paper Master) - Ryobi 3302H Operation Manual

Chapter 1 Operation Procedures
6. Mounting and Removing the Plate
(Metal Plate, Polyester Plate, or Paper Master)
Plate mounting and removing flow charts .,. Operation Edition - 59
Paper master mounting and removing without clamping the tail edge .,. Operation Edition - 23 and 26
1) Mount a metal plate.
(1)
(2)
Bend the plate tail edge (1) using the metal plate
bender in the delivery section.
Check that the plate tensioning knobs (1) are
properly loosened.
(Leading edge, Tail edge )
Check that the standard lines (1) of the diagonal
image adjustment are aligned.
The lines can be adjusted by turning the diagonal
imase adjustment knob (2).
Operation Edition - 17