Subaru IMPREZA GD 2007 Series Manual page 88

asieps_tobira_IM_US.book 29 ページ ２０１２年１月１７日 火曜日 午後３時４８分
10.Radiator Sub Fan and Fan
Motor
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from the battery.
3) Lift up the vehicle.
4) Remove the under cover.
5) Remove the connector of sub fan motor (B).
6) Remove the ATF hose from the clip of the radia-
tor sub fan motor assembly. (AT model)
7) Lower the vehicle.
8) Remove the air intake duct.
9) Remove the bolts which hold the radiator sub fan
shroud to the radiator.
10) Remove the radiator sub fan motor assembly
from underneath the vehicle.
Radiator Sub Fan and Fan Motor
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
C: DISASSEMBLY
FU-00009
1) Remove the clip which holds the fan motor con-
nector onto the shroud.
2) Remove the nut which holds the fan to the fan
motor.
(B)
CO-00225
3) Remove the bolts which hold fan motor onto
shroud.
CO-00101
CO(H4SO)-29
COOLING
CO-00101
CO-00049
CO-00050