Subaru IMPREZA GD 2007 Series Manual page 82

asieps_tobira_IM_US.book 23 ページ ２０１２年１月１７日 火曜日 午後３時４８分
7. Radiator
A: REMOVAL
CAUTION:
The radiator is pressurized. Wait until engine
cools down before working on the radiator.
1) Set the vehicle on a lift.
2) Disconnect the ground cable from the battery.
3) Lift up the vehicle.
4) Remove the under cover.
5) Drain engine coolant completely.
<Ref. to CO(H4SO)-16, DRAINING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
6) Disconnect the connectors of radiator main fan
(A) and sub fan motor (B).
(A)
Radiator
7) Disconnect the radiator outlet hose from thermo-
stat cover.
8) Disconnect the ATF cooler hoses from ATF
pipes. (AT model) Apply the cap to prevent ATF
leaks.
FU-00009
9) Lower the vehicle.
10) Disconnect the over flow hose.
11) Remove
CO(H4SO)-31, REMOVAL, Reservoir Tank.>
12) Remove the air intake duct.
13) Disconnect the radiator inlet hoses from the en-
gine.
CO-00274
(B)
14) Remove the radiator upper brackets.
CO-00225
CO(H4SO)-23
COOLING
CO-02249
CO-02250
the reservoir tank. <Ref.
CO-02251
CO-00090
to