Subaru IMPREZA GD 2007 Series Manual page 5

asieps_tobira_IM_US.book 4 ページ ２０１２年１月１７日 火曜日 午後３時４８分
HOW TO USE THIS MANUALS
6. MAINTENANCE
• Maintenance instructions for serviceable parts describe work area and detailed step with illustration. It also
describes the use of special tool, tightening torque, caution for each procedure.
• If many serviceable parts are included in one service procedure, appropriate reference is provided for each
parts.
Example:
15.Main Shaft Assembly for Sin-
gle-Range
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to MT-33, REMOVAL, Manual
Transmission Assembly.>
11) Tighten the lock nuts to the specified torque us-
ing ST1 and ST2.
NOTE:
Secure the lock nuts in two places after tightening.
ST1 498937000
ST2 499987003
Tightening torque:
118 N m (12.0 kgf-m, 86.8 ft-lb)
(A) Component
(B) Process
(C) Reference
7. DIAGNOSIS
Tables showing a step-by-step process make it easy to conduct diagnosis.
8. SI UNITS
Measurements in these manuals are according to the SI units. Metric and yard/pound measurements are
also included.
Example:
Tightening torque:
44 N·m (4.5 kgf-m, 33 ft-lb)
How to Use This Manuals
TRANSMISSION HOLDER
SOCKET WRENCH (35)
(E) (F)
ST1
ST2
(D) Cautions
(E) Tool number of special tool
(F) Name of special tool
HU-4
(A)
(B)
(C)
(D)
(G)
(H)
HU-00020
(G) Tightening torque
(H) Illustration