Subaru IMPREZA GD 2007 Series Manual page 30

asieps_tobira_IM_US.book 7 ページ ２０１２年１月１７日 火曜日 午後３時４８分
10.FRONT HOOD STAY INSTALLATION
At the check and general maintenance
When wider hood opening is necessary
1) Remove the hood stay.
2) Set the stay into the hole of front hood inner.
3) Remove the grommet in the wheel apron, and set the lower end of stay into hole.
11.TRAINING
For an information about training, contact a dealer
or agent.
12.GENERAL SCAN TOOL
Using general scan tools will greatly improve the ef-
ficiency of repairing engine electronic controls.
Subaru Select Monitor can be used to diagnose the
engine, ABS, AT and other electronically controlled
parts.
Note
NT-7
NOTE
NT-00147
NT-00148