Subaru IMPREZA GD 2007 Series Manual page 25

asieps_tobira_IM_US.book 2 ページ ２０１２年１月１７日 火曜日 午後３時４８分
NOTE
1. Note
A: NOTE
This information will improve the efficiency of main-
tenance and assure that the finished work is of a
good quality.
1. FASTENERS NOTICE
Fasteners are used to prevent the parts from dam-
age, dislocation and play due to looseness. Fasten-
ers must be tightened to the specified torque.
Do not apply paint, lubricant, rust retardant or other
substance to the surface around bolts, nuts, etc.
Doing so will make it difficult to obtain the correct
torque and result in looseness and other problem.
2. STATIC ELECTRICITY DAMAGE
Do not touch the control modules, connectors, logic
boards and other such parts when there is a risk of
static electricity. Always use a static electricity pre-
vention cord or touch grounded metal for the elimi-
nation of static electricity before conducting work.
3. BATTERY
When removing the battery cables, always be sure
to turn the ignition switch to OFF to prevent electri-
cal damage to the control module from overcurrent.
4. SERVICE PARTS
Use genuine parts for maximum performance and
maintenance when conducting repairs. Subaru/FHI
will not be responsible for poor performance result-
ing from the use of parts except for genuine parts.
5. PROTECTING VEHICLE UNDER MAIN-
TENANCE
Make sure to attach the fender cover, seat covers,
etc. before work.
6. ENSURING SECURITY DURING WORK
When working in a group of two or more, perform
the work with calling each other to ensure mutual
safety.
Note
NT-2