Subaru IMPREZA GD 2007 Series Manual page 448

asieps_tobira_IM_US.book 17 ページ ２０１２年１月１７日 火曜日 午後３時４８分
(1) Install the power steering reservoir tank to
the bracket.
(2) Connect the connector (A) to the power
steering pump switch.
(A)
(3) Attach the mounting bolts of the power
steering pump bracket.
Tightening torque:
22 N·m (2.2 kgf-m, 15.9 ft-lb)
(4) Install the power steering pipes onto the fuel
pipe protector RH.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
Intake Manifold
15) Install the generator. <Ref. to SC(H4SO)-14,
INSTALLATION, Generator.>
16) Install the air intake duct, air cleaner case and
air intake chamber. <Ref. to IN(H4SO)-7, INSTAL-
LATION, Air Intake Duct.> <Ref. to IN(H4SO)-5,
INSTALLATION, Air Cleaner Case.> <Ref. to
IN(H4SO)-6, INSTALLATION, Air Intake Cham-
ber.>
17) Connect the connector to the fuel pump relay.
18) Connect the ground cable to the battery.
FU-02572
C: DISASSEMBLY
1) Disconnect the engine ground terminal from the
intake manifold.
FU-02433
2) Remove the ignition coil and ignitor assembly.
<Ref. to IG(H4SO)-6, REMOVAL, Ignition Coil and
Ignitor Assembly.>
3) Remove the throttle body. <Ref. to FU(H4SO)-
12, REMOVAL, Throttle Body.>
FU-00139
4) Remove the EGR valve. <Ref. to FU(H4SO)-29,
REMOVAL, EGR Valve.>
5) Remove the PCV pipe.
FU-02807
FU(H4SO)-17
FUEL INJECTION (FUEL SYSTEMS)
FU-00009
FU-01090
FU-01091