Subaru IMPREZA GD 2007 Series Manual page 52

asieps_tobira_IM_US.book 9 ページ ２０１２年１月１７日 火曜日 午後３時４８分
15.ENGINE OIL
Check the engine oil amount. If the amount of oil is
insufficient, check that no leaks are found. Then,
add the necessary amount of the specified engine
oil.
(A)
(A) Oil level gauge
(B) Engine oil filler cap
(C) Upper level
(D) Lower level
(E) Approx. 1.0 2 (1.1 US qt, 0.9 Imp qt)
(F) Notch mark
16.TRANSMISSION FLUID
Check the amount of transmission fluid. If the
amount of fluid is insufficient, check for leaks.
Then, add the necessary amount of specified fluid.
(A)
(A) Oil level gauge
(B) Upper level
(C) Lower level
Pre-delivery Inspection
17.AT FRONT DIFFERENTIAL OIL
Check the AT front differential oil amount. If the
amount of oil is insufficient, check for leaks. Then,
add the necessary amount of the specified AT front
differential oil.
(B)
(F)
(C)
(E)
(D)
PM-00362
18.ENGINE COOLANT
Check the coolant amount on the reservoir. If the
amount of engine coolant is insufficient, check that
no leaks are found. Then, add the necessary
amount of coolant with the specified concentration.
19.CLUTCH FLUID
Check the clutch fluid amount. If the amount of fluid
is insufficient, check that no leaks are found. Then,
add the necessary amount of specified fluid.
(B)
(C)
PM-00030
20.WINDOW WASHER FLUID
Check the window washer fluid amount. If the
amount is insufficient, check that no leaks are
found. Then, add the necessary amount of washer
fluid.
21.FRONT HOOD LATCH CHECK
Retract the front hood stay and close the front
hood. Check that the front hood is completely
latched.
PI-9
PRE-DELIVERY INSPECTION
(A)
(A)
(B)
(C)
(A) Oil level gauge
(B) Upper level
(C) Lower level
(A) Reservoir tank
(B) MIN. level
(C) MAX. level
PI-00183
( A )
( C )
(B )
PM-00076