Subaru IMPREZA GD 2007 Series Manual page 450

asieps_tobira_IM_US.book 19 ページ ２０１２年１月１７日 火曜日 午後３時４８分
16) Disconnect the quick connector that fastens the
fuel injector pipe RH to the fuel pipe.
17) Disconnect the quick connector that fastens the
fuel injector pipe LH to the fuel pipe.
18) Remove the fuel injector pipe RH and LH.
19) Remove the bolts which install fuel pipe assem-
bly on intake manifold.
20) Remove the fuel pipe assembly from intake
manifold.
Intake Manifold
D: ASSEMBLY
NOTE:
When assembling the nipple, apply liquid gasket.
Liquid gasket:
THREE BOND 1105 (Part No. 004403010)
1) Tighten the bolts which install fuel pipe assembly
on intake manifold.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
FU-02720
2) Connect the fuel injector pipe LH to the fuel pipe.
NOTE:
Connect the quick connector securely.
FU-02721
3) Connect the fuel injector pipe RH to the fuel
pipe.
NOTE:
FU-02722
Connect the quick connector securely.
4) Install the fuel injector.
FU(H4SO)-19
FUEL INJECTION (FUEL SYSTEMS)
FU-02722
FU-02721
FU-02720