Subaru IMPREZA GD 2007 Series Manual page 444

asieps_tobira_IM_US.book 13 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. Intake Manifold
A: REMOVAL
1) Release the fuel pressure. <Ref. to FU(H4SO)-
43, RELEASING OF FUEL PRESSURE, PROCE-
DURE, Fuel.>
2) Disconnect the ground cable from the battery.
3) Open the fuel filler flap lid, and remove the fuel
filler cap.
4) Remove the air intake duct, air cleaner case and
air intake chamber. <Ref. to IN(H4SO)-7, REMOV-
AL, Air Intake Duct.> <Ref. to IN(H4SO)-5, RE-
MOVAL, Air Cleaner Case.> <Ref. to IN(H4SO)-6,
REMOVAL, Air Intake Chamber.>
5) Remove the generator. <Ref. to SC(H4SO)-14,
REMOVAL, Generator.>
6) Remove the power steering pump and power
steering reservoir tank from the bracket.
(1) Remove the bolts which hold the power
steering pipes onto the fuel pipe protector RH.
NOTE:
Do not disconnect the power steering hose.
Intake Manifold
(2) Remove the installation bolt installing the
power steering pump bracket.
(3) Disconnect the connector (A) from the pow-
er steering pump switch.
FU-00009
(4) Remove the reservoir tank from the bracket
by pulling it upward.
(5) Place the power steering pump on the right
side wheel apron.
FU-02807
7) Remove the spark plug cords from the spark
plugs by pulling the plug caps. (Do not pull the
cord.)
FU(H4SO)-13
FUEL INJECTION (FUEL SYSTEMS)
FU-00139
(A)
FU-02433
FU-02572
FU-00021