Subaru IMPREZA GD 2007 Series Manual page 83

asieps_tobira_IM_US.book 24 ページ ２０１２年１月１７日 火曜日 午後３時４８分
COOLING
15) Detach the power steering hose from the clip
on the radiator.
16) Lift the radiator up and away from vehicle.
B: INSTALLATION
1) Attach the radiator lower cushion to the hole on
the radiator lower bracket.
2) Install the radiator to vehicle.
NOTE:
Make pins on the lower side of radiator be fitted into
the radiator lower cushions on body side.
3) Install the radiator upper brackets and tighten
the bolts.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
Radiator
4) Attach the power steering hose to the radiator.
CO-00037
5) Connect the radiator inlet hose.
6) Install the air intake duct.
7) Install the reservoir tank. <Ref. to CO(H4SO)-
31, INSTALLATION, Reservoir Tank.>
8) Connect the over flow hose.
CO-00041
9) Lift up the vehicle.
10) Connect the ATF cooler hoses. (AT model)
11) Connect the radiator outlet hose.
CO-00090
CO(H4SO)-24
CO-00037
CO-02251
CO-02250
CO-02249