Subaru IMPREZA GD 2007 Series Manual page 107

asieps_tobira_IM_US.book 16 ページ ２０１２年１月１７日 火曜日 午後３時４８分
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
15.Drain Valve
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from the battery.
3) Lift up the vehicle.
4) Remove the canister. <Ref. to EC(H4SO)-6, RE-
MOVAL, Canister.>
5) Remove the clip (A) and remove the drain valve
(B) from the canister.
( A )
( A )
( B )
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new clip.
( A )
( A )
( B )
(A) Clip
(B) Drain valve
C: INSPECTION
1) Check that all hoses are connected securely.
2) Make sure the hoses are not cracked or loose.
Drain Valve
FU-00009
EC-00266
EC-00266
EC(H4SO)-16