Subaru IMPREZA GD 2007 Series Manual page 242

asieps_tobira_IM_US.book 133 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
1 CHECK FRONT OXYGEN (A/F) SENSOR
CONNECTOR AND COUPLING CONNEC-
TOR.
2 CHECK HARNESS BETWEEN ECM AND
FRONT OXYGEN (A/F) SENSOR CONNEC-
TOR.
1) Turn the ignition switch to OFF.
2) Disconnect the connector from front oxygen
(A/F) sensor.
3) Turn the ignition switch to ON.
4) Measure the voltage between ECM and
chassis ground.
Connector & terminal
(B135) No. 9 (+) — Chassis ground (–):
(B135) No. 8 (+) — Chassis ground (–):
Check
Has water entered the connec-
tor?
Is the voltage 8 V or more?
EN(H4SO)(diag)-133
ENGINE (DIAGNOSTICS)
Yes No
Completely Go to step 2.
remove any water
inside.
Repair the short Replace the front
circuit to power in oxygen (A/F) sen-
the harness sor. <Ref. to
between the ECM FU(H4SO)-36,
and front oxygen Front Oxygen (A/F)
(A/F) sensor con- Sensor.>
nector.