asieps_tobira_IM_US.book 15 ページ 2012年1月17日 火曜日 午後3時48分
17) Remove the EGR pipe from intake manifold.
18) Disconnect the fuel hoses from fuel pipe.
(1) Disconnect the quick connector on the fuel
delivery line and return line by pushing the ST in
the direction of the arrow.
ST 42099AE000 CONNECTOR REMOVER
(2) Remove the clip and disconnect the evapo-
ration hose from the pipe.
CAUTION:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
(A)
(B)
(A) Fuel delivery hose
(B) Evaporation hose
19) Remove the bolts which secure intake manifold
to cylinder head.
20) Remove the intake manifold.
Intake Manifold
B: INSTALLATION
1) Install the intake manifold onto cylinder heads.
NOTE:
Use a new gasket.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
FU-02974
2) Connect the fuel hose and evaporation hose to
the fuel pipe.
NOTE:
If the hose is damaged, replace with a new part.
FU-02715
(A) Fuel delivery hose
(B) Evaporation hose
3) Install the EGR pipe to intake manifold.
Tightening torque:
34 N·m (3.4 kgf-m, 24.6 ft-lb)
FU-02716
FU(H4SO)-15
FUEL INJECTION (FUEL SYSTEMS)
FU-02716
(A)
(B)
FU-02824
FU-02974