asieps_tobira_IM_US.book 290 ページ 2012年1月17日 火曜日 午後3時48分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
ENGINE (DIAGNOSTICS)
Step
19
CHECK ELECTRONIC THROTTLE CON-
TROL.
Measure the resistance between electronic
throttle control terminals.
Terminals
No. 2 — No. 1:
20
CHECK ELECTRONIC THROTTLE CON-
TROL.
Move the throttle valve to the fully open and fully
closed positions with fingers.
Check that the valve returns to the specified
position when releasing fingers.
Check
Is the resistance 50 Ω or less? Go to step 20.
Does the valve return to the
specified position? Standard
value: 3 mm (0.12 in) from fully
closed position
EN(H4SO)(diag)-290
Yes
No
Replace the elec-
tronic throttle con-
trol. <Ref. to
FU(H4SO)-12,
Throttle Body.>
Repair poor con-
Replace the elec-
tact of the ECM
tronic throttle con-
connector.
trol. <Ref. to
FU(H4SO)-12,
Throttle Body.>