Subaru IMPREZA GD 2007 Series Manual page 449

asieps_tobira_IM_US.book 18 ページ ２０１２年１月１７日 火曜日 午後３時４８分
FUEL INJECTION (FUEL SYSTEMS)
6) Remove the fuel pipe protector LH.
7) Remove the fuel pipe protector RH.
8) Disconnect the connectors (A) from fuel injector.
9) Remove the harness band (B) which holds the
engine harness to the fuel injector pipe.
10) Remove the purge control solenoid valve.
<Ref. to EC(H4SO)-7, REMOVAL, Purge Control
Solenoid Valve.>
11) Remove the harness band clips which install
the engine harness.
Intake Manifold
FU-02325
FU-02326
(B)
(A)
FU-02729
FU-02329
FU(H4SO)-18
12) Remove the bolts which hold engine harness to
the intake manifold.
13) Remove the engine harness from the intake
manifold.
14) Remove the bolts which hold the fuel injector
pipe to the intake manifold, as shown in the figure.
• RH side
• LH side
15) Remove the fuel injector from fuel injector pipe.
FU-01097
FU-02717
FU-02718
FU-02719