Flow Of The Initial Setup - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
8 Setup Outline
The following chapters explain the procedures to setup C80.
Procedures when setting up again (with backup files of parameters and so on) are different from those of initial setup.
For initial setup, see "Flow of the initial setup".
When setting up with the backup file, see the chapter of "Data Backup and Restoration".

8.1 Flow of the Initial Setup

The following shows the overall flow of the initial setup.
Refer to the following chapters for setting the machine control functions.
- Setting the Position Detection System
- Deceleration Check
- Setting the Tool Entry Prohibited Range
IB-1501452-C
Start
Connecting the devices
GOT initial setup
Installing GT Designer3
Communication setting
Setting the destination drive for backup data
Creating a GOT screen
Transferring the data to GOT
PLC CPU initial setup
Transfer setup for GX Works3
Setting multi-CPU parameters
CNC CPU initial setup
Initializing CNC CPU internal data
Setting multi-CPU parameters
Setting the date and time
Setting the machine parameters (1)
Setting the parameters for the system specifications
Formatting the NC memory
Setting the machine parameters (2)
Setting the parameters for the machine specifications
Setting drive unit
Servo simplified adjustment
Inputting ladder programs
End
Refer to chapter 9
Refer to chapter 10
Refer to chapter 11
Refer to chapter 12.1
Refer to chapter 12.1
Refer to chapter 12.2 to 12.7
112