Mitsubishi Electric C80 Series Connection And Set Up Manual page 187

C80 Series Connection and Setup Manual
11 CNC CPU Initial Setup
(1) Select [Mainte] tab and select [Mainte] at the bottom left.
(2) Select [Psswd input] at the bottom left.
Enter the password for the machine parameter and then press [INPUT].
(Note 1) When entering "A", press the shift key before pressing [A]. Do not press both keys at the same time.
(Note 2) The password will be displayed as "*****".
(3) Select [Param] at the bottom left.
(4) Select [Para No search] in the middle at the bottom, enter "26801" in the setting area and then press [INPUT] key.
IB-1501452-C 156