Installation And Removal The Signal Splitter - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
5 Installation

5.1.4 Installation and Removal the Signal Splitter

The signal splitter is only for the installation of the DIN rail.
With the DIN rail, the unit can be installed both laterally and longitudinally.
[Installation]
(1) Hook the upper latch of the unit on the DIN rail.
(2) Push the unit into the rail.
[Lateral direction]
[Longitudinal direction]
IB-1501452-C
(1)
(2)
(1)
(2)
66