Symbols For Writing Cable Drawings - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
7 Cable

7.1 Symbols for Writing Cable Drawings

(1)
(2)
(3)
(4) In the cable drawings, the partner of the twisted pair cable is given a priority, so the pin No. of the connectors at
both ends are not necessary in number of order.
(5) Equivalent parts can be used for the connector, contact and wire material.
(6) The tolerances of the cables provided by MITSUBISHI are as follows:
Cable length (mm)
10001 ～ 15000
15001 ～ 20000
IB-1501452-C
indicates twisted pair.
indicates the shield sheath.
indicates shield clamping to the grounding plate.
～ 600
601 ～ 1000
1001 ～ 5000
5001 ～ 10000
Tolerances (mm)
±30
±50
±100
±150
±200
±300
88