J396 Cable - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
7 Cable

7.3.10 J396 Cable

Max. cable length: 10m
Application: Optical communication cable
for wiring between drive units (inside panel)
Use when wiring in the panel with a cable of 10m or less.
[OPT]
Connector : LGP-Z0007PK
Recommended manufacturer :
HONDA TSUSHIN KOGYO
(Note 1) Binding the cables too tight with tie-wraps could result in an increased loss or a disconnection. Use a
cushioning material such as a sponge or rubber when bundling the cables and fix so that the cables do not
move. Recommended clamp material: CKN-13SP KITAGAWA INDUSTRIES.
(Note 2) Never bundle the cables with vinyl tape. The plasticizing material in the vinyl tape could cause the POF cable
to break.
(Note 3) Loop the excessive cable with twice or more than the minimum bending radius.
IB-1501452-C
OPT
OPT
1
2
Wire material : PFDU-CD1002-18E22T
Recommended manufacturer : TORAY
Cable
2-core parallel cord
106
OPT
OPT
1
2
Minimum bending radius: R
30mm