Mitsubishi Electric C80 Series Connection And Set Up Manual page 189

C80 Series Connection and Setup Manual
11 CNC CPU Initial Setup
[When connecting two units of CNC CPU]
(a) Device setting of NC1
(Note)
(a-1) Perform the device setting on CPU1 side of NC1.
CPU1 (PLC CPU side): Setting example of two units of CNC CPU, 2-part system and 8 control axes
IB-1501452-C
When the [Execute init.] menu is pressed at NC1, the settings for (a-1) to (a-3) are performed
automatically.
158