Mitsubishi Electric C80 Series Connection And Set Up Manual page 65

Hide thumbs Also See for C80 Series:
Table of Contents

Advertisement

C80 Series Connection and Setup Manual
4 General Specifications
Item
Base loading position
Applicable base unit
Input power supply
Input frequency
Input voltage distortion
factor
Maximum input apparent
power
Input current
Repetitive peak current
Inrush current
5VDC
Rated output
current
24VDC
Overcurrent
5VDC
*1
protection
24VDC
Overvoltage
5VDC
*2
protection
Efficiency
Permissible instantaneous
*3
power off time
Withstand voltage
Insulation resistance
Noise withstand level
Operation display
Fuse
Application
Rated switching
voltage/current
Minimum switching
load
Response time
Life time
Surge suppressor
Fuse
Terminal screw size
Applicable size of wire
Applicable solderless
terminal
Applicable tightening torque
Mass [kg]
IB-1501452-C
Q63P
Q series power supply module loading slot
24VDC+30%-35%
(15.6 to 31.2VDC)
-
-
45W
at 24VDC input: 1.82A or less
at 15.6VDC input: 2.8A or less
-
100A 1ms or less (at 24VDC input)
6A
-
6.6A or higher
-
Within 10ms (at 24VDC input)
500VAC across primary and 5VDC
10MΩ or more (measured with an insulation
resistance tester)
By noise simulator of 500Vp-p noise voltage, 1μs
noise width and 25 to 60Hz noise frequency
LED display
(Normal: ON (Green), Error: OFF)
OFF to ON: 10ms or less, ON to OFF: 12ms or less
Mechanical: 20 million times or more
Electrical: 100 thousand times or more at rated switching voltage/current
0.33
Q63B, Q65B, Q68B, Q612B
100 to 240VAC+10%-15%
at 100VAC input: 1.3A or less
at 200VAC input: 0.75A or less
5.5 to 6.5V
70% or more
Across inputs/LG and outputs/FG
2,830VAC rms/3 cycles
(Altitude: 2,000m (6,561.68ft.))
Input and LG batched, output and FG batched,
batch input-LG, batch output-FG
10MΩ or m ore by insulation resistance tester
By noise simulator of 1,500Vp-p noise voltage,
1μs noise width and 25 to 60Hz noise frequency
Noise voltage IEC61000-4-4, 2kV
(Normal: ON (Green), Error: OFF)
Built-in (Unchangeable by user)
ERR contact
24VDC, 0.5A
5VDC, 1mA
None
None
M3.5 screw
2
0.75 to 2mm
RAV1.25-3.5, RAV2-3.5
0.66 to 0.89Nꞏm
34
Q64PN
(85 to 264VAC)
50/60Hz±5%
Within 5%
160VA
4A or less
*4
Within 20A 8ms
8.5A
-
9.9A or higher
-
Within 20ms
(500VDC)
LED display
0.47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents