Changing The Password - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
18 Appx.1: Protection Setting

18.4 Changing the Password

Operation Methods
(Example) Change the password of operation level 4 from "OLDPASS" to "NEWPASS"
(1) Press the menu [Change pasword].
(2)
Use [ ↑ ] or [ ↓ ] key to move the cursor to the operation
level where you want to change the password. (Operation
level 4 in this case)
(3) Enter the current password for the operation level of the
cursor position.
(Example) OLDPASS [INPUT]
(4) Enter a new password.
(Example) NEWPASS [INPUT]
(5) Enter the new password again.
(Example) NEWPASS [INPUT]
(Note 1) Set a password with one-byte alphanumeric characters between 3 and 8 letters (only capital letters are
acceptable for alphabet). In addition, "UPARA" is unavailable to set as the password.
(Note 2) Changing the password is available only for the lower operation level than the current one.
The menu [Change pasword] is highlighted.
The operation message "Enter the current password." is
displayed.
The cursor appears on the current operation level.
The operation message "Enter the current password." is
displayed.
<When the password is correct>
The operation message "Enter a new password." is displayed.
<When the password is incorrect>
The operation message "Your password is incorrect." is
displayed, and then the operation returns to the process (2).
<When the acceptable password is entered>
The operation message "Type in the new password again." is
displayed.
<When the unacceptable password is entered>
The operation message "Set a password that meets the
condition." is displayed, and then the operation returns to the
process (4).
<When the re-entered password is equal to the first one>
The operation message "Password has changed" is
displayed, and the highlighted menu [Change pasword]
returns to normal.
<When the re-entered password is not equal to the first one>
The operation message "Your password is incorrect." is
displayed, and then the operation returns to the process (4).
243 IB-1501452-C