G380 Cable - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
7 Cable

7.3.8 G380 Cable

Max. cable length: 30m
Application: Optical communication cable
for wiring between drive units (outside panel)
for optical communication repeater unit
Use when the cable length is 10m or more to 30m or less.
[OPT]
Connector: CF-2D101-S
Recommended manufacturer:
Japan Aviation Electronics
2-core cable (section with reinforced sheath)
2-core cable (section without reinforced sheath)
(Note 1) Binding the cables too tight with tie-wraps could result in an increased loss or a disconnection. Use a
cushioning material such as a sponge or rubber when bundling the cables and fix so that the cables do not
move. Recommended clamp material: CKN-13SP KITAGAWA INDUSTRIES.
(Note 2) Never bundle the cables with vinyl tape. The plasticizing material in the vinyl tape could cause the PCF cable
reinforced sheath to damage.
(Note 3) Loop the excessive cable with twice or more than the minimum bending radius.
IB-1501452-C
Section with reinforced sheath
OPT
Section without reinforced sheath
OPT
1
2
Wire material:
Hard clad type PCF optic cable
Recommended manufacturer:
Oki Electric Cable
Cable
104
OPT
OPT
1
2
Minimum bending radius: R
50mm
25mm