Stored Stroke Limit Ic - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
15 Setting the Tool Entry Prohibited Range

15.2.5 Stored Stroke Limit IC

The boundary is set for each axis with the axis parameters "#2061 OT_1B-" and "#2062 OT_1B+". The inside of the set
boundary is the machine movement valid range.
This is valid when the axis parameter "#2063 OT_1Btype (Soft limit IB type)" is set to "2". Cannot be used with soft limit
IB.
IB-1501452-C
2
: Moveable range
: Prohibited range
Point 3: "#2062 OT_1B+ (Soft limit IB+)" and
Point 4: "#2061 OT_1B- (Soft limit IB-)" are set with the coordinate values in the basic machine
coordinate system.
Points 1 and 2 are the prohibited range set with stored stroke limit I.
1
4
218
3