Writing The Created Parameters To The Plc - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
10 PLC CPU Initial Setup

10.1.4 Writing the Created Parameters to the PLC

(1) Select [Convert]-[Rebuild All] from the menu and then click [OK] in the next dialog.
(2) When the next dialog appears, click [Yes].
(3) Writing the setting contents in the PLC CPU.
Select [Online]-[Write to PLC] from the menu, click [Parameter + Program] in the next dialog and then click
[Execute].
Now the PLC CPU setup has been completed.
IB-1501452-C 148