Gitguu"Twng<"
NCI<"
80304"Rqtv"Eqphki"
Before creating the 802.1Q VLAN, please acquaint yourself with all the devices connected to the
switch in order to configure the ports properly.
Choose the menu XNCP→:2403S"XNCP→Rqtv"Eqphki to load the following page.
The following entries are displayed on this screen:
XNCP"Rqtv"Eqphki"
"
Rqtv"Ugngev<"
Ugngev<"
Rqtv<"
Select the Egress Rule for the VLAN port member. The default
egress rule is UNTAG.
TAG: All packets forwarded by the port are tagged. The
packets contain VLAN information.
UNTAG: Packets forwarded by the port are untagged.
Displays the LAG to which the port belongs.
Figure 6-5 802.1Q VLAN – Port Config
Click the Select" button to quick-select the corresponding entry
based on the port number you entered.
Select the desired port for configuration. It is multi-optional.
Displays the port number.
59