System Tools Configurations; Using The Gui; Configuring The Boot File - TP-Link T1600G-18TS Configuration Manual

Managing System
4

System Tools Configurations

With system tools configurations, you can:
 Configure the boot file
 Restore the configuration of the switch
 Back up the configuration file
 Upgrade the firmware
 Reboot the switch
 Configure the reboot schedule
 Reset the switch
4.1

Using the GUI

4.1.1 Configuring the Boot File

Choose the menu System > System Tools > Boot Config to load the following page.
Figure 4-1 Configuring the Boot File
Follow these steps to configure the boot file:
1) In the Boot Table section, select one or more units and configure the relevant
parameters.
System Tools Configurations
Configuration Guide 45