User Management; User Table - TP-Link T2500G-10TS User Manual

Global address Table

Select:
Global Address:
Prefix Length:
Type:
Preferred Lifetime
/Valid Lifetime:
Status:
Tips:
After adding a global IPv6 address to your switch manually here, you can configure your PC's
global IPv6 address in the same subnet with the switch and login to the switch via its global
IPv6 address.

4.2 User Management

User Management functions to configure the user name and password for users to log on to
the Web management page with a certain access level so as to protect the settings of the
switch from being randomly changed.
The User Management function can be implemented on User Table and User Config pages.

4.2.1 User Table

On this page you can view the information about the current users of the switch.
Choose the menu System→User Management→User Table to load the following page.
Select the desired entry to delete or modify the corresponding
global address.
Modify the global address.
Modify the prefix length of the global address.
Displays the configuration mode of the global address.
Manual: Indicates that the corresponding address is

configured manually
Auto: Indicates that the corresponding address is created

automatically using the RA message or obtained from the
DHCPv6 Server.
Displays the preferred time and valid time of the global address.
Displays the status of the global address.
Normal: Indicates that the global address is normal.

Try: Indicates that the global address may be newly

configured.
Repeat: Indicates that the corresponding address is

duplicate. It is illegal to access the switch using this address.
Figure 4-11 User Table
25