Basic Config; Global Config - TP-Link JetStream T1500G-10MPS User Manual

Max Frame Size TLV
Power Via MDI TLV
The LLDP module is mainly for LLDP function configuration of the switch, including three
submenus: Basic Config, Device Info, Device Statistics and LLDP-MED.

14.1 Basic Config

LLDP is configured on the Global Config and Port Config pages.

14.1.1 Global Config

On this page you can configure the LLDP parameters of the device globally.
Choose the menu LLDP→Basic Config→Global Config to load the following page.
The following entries are displayed on this screen
Global Config

LLDP:
Parameters Config

Transmit Interval:
Hold Multiplier:
The Maximum Frame Size TLV indicates the maximum frame
size capability of the implemented MAC and PHY.
The Power Via MDI TLV allows network management to
advertise and discover the MDI power support capabilities of
the sending IEEE 802.3 LAN station.
Figure 14-1 LLDP Global Configuration
:
Enable/disable LLDP function globally.
Enter the interval for the local device to transmit LLDPDU to its
neighbors. The default value is 30.
Enter a multiplier on the Transmit Interval. It determines the
actual TTL (Time To Live) value used in an LLDPDU. TTL = Hold
Multiplier * Transmit Interval. The default value is 4.
207