Protocol Group Table - TP-Link JetStream T2700G-28TQ User Manual

The packet in Protocol VLAN is processed in the following way:
1. When receiving an untagged packet, the switch matches the packet with the current Protocol
VLAN. If the packet is matched, the switch will add a corresponding Protocol VLAN tag to it. If
no Protocol VLAN is matched, the switch will add a tag to the packet according to the PVID of
the received port. Thus, the packet is assigned automatically to the corresponding VLAN for
transmission.
2. When receiving tagged packet, the switch will process it basing on the 802.1Q VLAN. If the
received port is the member of the VLAN to which the tagged packet belongs, the packet will
be forwarded normally. Otherwise, the packet will be discarded.
3. If the Protocol VLAN is created, please set its enabled port to be the member of
corresponding 802.1Q VLAN so as to ensure the packets forwarded normally.

7.5.1 Protocol Group Table

On this page, you can create Protocol VLAN and view the information of the current defined
Protocol VLANs.
Choose the menu VLAN→Protocol VLAN→Protocol Group Table to load the following page.
The following entries are displayed on this screen:
Protocol Group Table

Select:
Protocol Name:
VLAN ID:
Member:
Operate:
Protocol Type Type value
IPX 0x8137
IS-IS 0x8000
LACP 0x8809
802.1X 0x888E
Table 7-2 Protocol types in common use
Figure 7-9 Create Protocol VLAN
Select the desired entry. It is multi-optional.
Displays the protocol of the protocol group.
Displays the corresponding VLAN ID of the protocol.
Displays the member of the protocol group.
Click the Edit button to modify the settings of the entry. And click the
Apply button to apply your settings.
83