2
Press [Entire Image]
3
Press
Reducing/Enlarging Using the Original and Copy/Record
Sizes
The Zoom Program mode enables you to reduce or enlarge originals by individually entering the
dimensions of the original and copy paper (record size).
Any copy (zoom) ratio from 25% to 400% may be used.
The following two Zoom Program modes are available.
NOTE
• The specified sizes are converted into a copy (zoom) ratio (%) by the machine using the formula below.
The result is rounded to the closest integer.
Copy (zoom) ratio (%) = (copy (record) size/original size) x 100
• To cancel this setting, press [Copy Ratio]
• For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the Reference
Guide.
[Done].
.
[Zoom Program]
[Cancel].
Changing the Copy (Zoom) Ratio
3
3-17