HUAWEI ME936 LTE M.2 Module
Application Guide
3
3.1 Overview
Modules are usually embedded into equipments such as personal computers. The
airplane mode provided by the modules can be enabled or disabled as required.
When the equipment into which the module is embedded is in airplane mode, the
radio frequency (RF) of the module is disabled, and other functions of the equipment
are still available.
3.2 Setting the Flight Mode
3.2.1 Reference Process
Command
AT^RFSWITCH=1
OK
AT^RFSWITCH?
^RFSWITCH: 1,1
OK
AT^RFSWITCH=0: sets the software-controlled RF switch to off.
AT^RFSWITCH=1: sets the software-controlled RF switch to on.
The value set by AT^RFSWITCH command is saved upon power-off. So the settings
will be used as the initial settings next time the module is powered on.
Issue 02 (2017-12-11)
Airplane Mode Application Scenarios
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Airplane Mode Application Scenarios
Description
Sets the software-controlled RF switch to on.
Queries the states of the software and hardware
controlled RF switches.
Indicates the software switch is on, and the hardware
switch is on.
17