Cgqreq-Quality Of Service Profile (Requested); Command Syntax - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Note:
2.
Note:
3.
Note:
4.
Note:
8.2 +CGQREQ–Quality of Service Profile (Requested)

8.2.1 Command Syntax

Command
+CGQREQ[=<cid>[,<prece
dence > [,<delay>
[,<reliability.> [,<peak>
[,<mean>]]]]]]
+CGQREQ?
Issue 04 (2013-01-28)
OK
This command supports two kinds of packet switching protocols: "IP" and "PPP". The TEST
command lists the values of other parameters supportable by each protocol.
Command 2: AT+CGDCONT=16,"PPP","abc.com","10.111.145.233",1,1
Result 2:
OK
This command stores 1 new BDP setting environment in the MS. The <cid> is 16.
Command 3: AT+CGDCONT?
Result 3: +CGDCONT: 1,"IP","vcol.com","",0,0
+CGDCONT: 16,"PPP","abc.com","10.111.145.233", 1, 1
OK
Now the MS has an additional PDP setting environment whose <cid> is 16.
Command 4: AT+CGDCONT=16
Result 4:
OK
Clear the PDP setting environment whose <cid>=16
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible Response(s)
<CR><LF>OK<CR><LF>
In case of error:
<CR><LF>ERROR<CR><LF>
<CR><LF>+CGQREQ: <cid>,<precedence>,
<delay>,<reliability>,<peak>,<mean>[<CR><LF>+C
GPRS Service Commands
113