Table of Contents
Advertisement
Figure 73:
Microscope electronics box
6. If your system has an infrared laser (MP) or an optical parametric oscillator (OPO),
switch on the NDD detection unit:
Figure 74:
Switch on the NDD detection unit
7. Switch on the scan head on the front side of the compact supply unit (see Figure 75,
item 1).
Figure 75:
Overview of the Control Panel Field on the Compact Supply Unit
8. Switch on the lasers on the front side of the compact supply unit (see Figure 75, item 2).
The system's power supplies and fans are started.
9. If your system has an infrared laser (MP) or an optical parametric oscillator (OPO),
switch on these components as described in the manufacturer's respective user
manual.
Switching On the System
97
Advertisement
Table of Contents
